Archive

UDK: 666.97.031.3001.4
DOI: n/a

Published: Građevinar 59 (2007) 5
Paper type: Original scientific paper
Download article (Croatian): PDF
Download article (English): n/a

Analysis of voids in concrete - interlaboratory testing

Dunja Mikulić, Ivan Gabrijel, Ana Hranilović Trubić, Srđan Uzelac

Abstract

Results obtained by testing properties of air voids in fresh and hardened concrete are presented and analysed. In fresh concrete, the testing was conducted by compression using porometer and by air void analysis using the air void analyser. The voids in hardened concrete were analyzed through microscopic analysis using the device called the RapidAir 457. The following properties of air voids were measured: total quantity, spacing factor and specific area. The results obtained by two laboratories were then compared.

Keywords
concrete voids, fresh concrete, hardened concrete, compression method, microscopic analysis

HOW TO CITE THIS ARTICLE:

Mikulić, D., Gabrijel, I., Trubić, A. H., Uzelac, S.: Analysis of voids in concrete - interlaboratory testing, GRAĐEVINAR, 59 (2007) 5

OR:

Mikulić, D., Gabrijel, I., Trubić, A. H., Uzelac, S. (2007). Analysis of voids in concrete - interlaboratory testing, GRAĐEVINAR, 59 (5)
Authors:

Dunja Mikulić
University of Zagreb,
Faculty of Civil Engineering

Ivan Gabrijel
University of Zagreb,
Faculty of Civil Engineering

Ana Hranilović Trubić
Institut IGH d.d.

Srđan Uzelac
Institut IGH d.d.